Lingo

OPM Field & Noise Simulator

Why 1/r³ means a helmet at 4 cm and an on-scalp sensor at 0.5 cm are not in the same league — once you get the ambient field under control.

Source

Cortical dipoles are a few nA·m; the field they make is only tens to hundreds of fT.

2.0 cm
0.56
0.60 nA·m
0.053

Sensor placement

This is where OPMs win: 0.5 cm from cortex instead of 4 cm for a cryogenic helmet.

0.5 cm
0.23
100
8300

Noise environment

Cars, elevators, and elevators-adjacent buildings swamp brain fields until you shield.

180 nT
1500

Signal versus distance

Because the field falls off as 1/r³, distance is the dominant term. The curve below is signal magnitude against source-to-sensor distance for the current source.

Cortical signal
3.8e-2 nT
Ambient field
1.8e+2 nT
Sensor noise
5.0e-5 nT
38.4 fTCortical signal
2.13e-4OPM SNR
1.54e-5Helmet SNR
14×OPM advantage

What to watch. Two separate facts, often conflated. Detectability is set by the noise floor: unshielded, the ambient field is four orders of magnitude above any cortical signal, so nothing is detectable no matter how close the sensor sits — tick the shield and the signal emerges. OPM advantage over a helmet is then purely geometric: 1/r³ puts the on-scalp sensor about 14× ahead for the same source, and the ratio is set by where each sensor sits, not by shielding. The remaining OPM constraints are practical: hair must be parted or held aside, and the sensors weigh about 0.5 kg each.